Automobile engine oil
Automobile engine oil API GF-1 10W-30 1L*12
Unique ingredients: the main ingredients include PAO polyalphaolefin synthetic base oil, which can improve the anti-wear, anti-oxidation and shear resistance of engine oil. When the space bio-smart ester compound is heated to 50℃, it will release free ions, forming a tough, wear-resistant, acid-proof, corrosion-proof and rust-proof intelligent rejuvenation film. Molybdenum dialkyl dithiocarbamate enhances the anti-wear, antifriction, extreme pressure resistance, rust prevention and corrosion resistance of engine oil.
0$
Features
Excellent performance: It has excellent thermal stability and oxidation resistance, can maintain a stable oil film at extreme temperatures, and effectively reduce the friction and wear of internal parts of the engine. Its high-temperature fluidity is good, which can ensure the engine to be fully lubricated, and it also contains detergent dispersant, which can prevent the formation of carbon deposit and sludge and keep the engine clean. In addition, GF1 lubricating oil has good thermal conductivity, which can assist the engine to dissipate heat and avoid serious faults caused by local overheating.
Application
Wide range of application: it is suitable for a variety of vehicles, including high-end MPV commercial vehicles, ordinary family cars, turbocharged engine vehicles, high-end luxury cars and racing cars, etc. It can also meet the lubrication needs of hybrid vehicles and is compatible with manual and automatic transmission vehicles. -Environmental protection and energy saving: GF1 lubricating oil adopts low-carbon environmental protection formula, which helps to improve fuel economy, reduce fuel consumption and reduce pollutant emission, and meets the requirements of modern environmental protection. -Long oil change cycle: GF1 synthetic oil has good shear resistance, and the oil change cycle is generally more than 20,000-30,000 kilometers, which can reduce the trouble for car owners to change oil frequently and reduce the use cost.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
