Automobile engine oil
Automobile engine oil API SP GF-6 5W-20 4L*6
"GF-6" is a standard formulated by the International Lubricant Standardization Certification Committee (ILSAC). GF-6A focuses on fuel economy and environmental protection, which adds environmental protection requirements to the API SP standard. "5W-20" is the viscosity grade of engine oil, where "5W" means excellent low-temperature fluidity, which can quickly lubricate the engine in extremely cold weather and reduce cold start wear, and "20" means that it can maintain good fluidity at high temperature and protect the engine from high temperature damage.
0$
Features
Performance characteristics: excellent low-temperature fluidity, which can provide rapid lubrication protection for the engine. At the same time, it has good high-temperature oxidation resistance, shear stability and wear resistance, which can effectively reduce the frequency of low-speed early combustion, reduce the wear risk of timing chain, inhibit the generation of sludge and carbon deposit, and keep the engine clean. In addition, the oil also has a low sulfate ash content, which is compatible with the national six emission vehicles with particle traps (GPF), and helps to reduce the risk of blockage of exhaust aftertreatment devices.
Application
Scope of application: It is suitable for vehicles with advanced engine technology and recommended viscosity grade of 5W-20, especially for high-performance vehicles meeting national VI emission standards, such as some American, Japanese and Korean and domestic new cars equipped with turbocharged direct injection (TGDI) technology.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
