Automobile engine oil
Automobile engine oil API SP GF-6 0W-20 4L*6
"GF-6" is a standard formulated by the International Lubricant Standardization Certification Committee (ILSAC). GF-6A focuses on fuel economy and environmental protection, which adds environmental protection requirements to the API SP standard. "0W-20" is the viscosity grade of engine oil, where "0W" means excellent low-temperature fluidity, which can quickly lubricate the engine in extremely cold weather and reduce cold start wear, and "20" means that it can maintain good fluidity at high temperature and protect the engine from high temperature damage.
0$
Features
Performance characteristics: It has excellent antifriction performance, which helps to reduce fuel consumption and improve fuel economy. It can effectively prevent low-speed pre-ignition (LSPI) and protect the engine from damage, which is especially important for turbocharged direct injection (TGDI) engines. It has strong cleaning and dispersion performance, which can maintain the efficient operation of engine parts such as pistons and turbochargers, reduce the generation of carbon deposits and sludge, and reduce the risk of knocking. In addition, its good oxidation resistance can slow down the viscosity increase caused by oxidation at high temperature and prolong the oil change cycle.
Application
Scope of application: It is suitable for vehicles with national six (and below) emissions, especially for vehicles with various exhaust emission technologies (such as GPF and TWC), variable timing valves (such as VVT), turbocharging (TGDI／GDI), double injection, automatic start-stop and hybrid power. Usually suitable for American, Japanese, Korean and other high-end cars, SUVs, MPVs and other models.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
