Automobile engine oil
Automobile engine oil API SP GF-6 5W-50 1L*12
"GF-6" is a standard formulated by the International Lubricant Standardization Certification Committee (ILSAC). GF-6A focuses on fuel economy and environmental protection, which adds environmental protection requirements to the API SP standard. "5W-50" is the viscosity grade of engine oil, where "5W" means excellent low-temperature fluidity, which can quickly lubricate the engine in extremely cold weather and reduce cold start wear, and "50" means that it can maintain good fluidity at high temperature and protect the engine from high temperature damage.
0$
Features
Performance characteristics: it has good low-temperature starting performance and can quickly provide lubrication protection for the engine in low-temperature environment. At the same time, at high temperature, 5W-50 engine oil can maintain high oil film strength and stability, effectively reduce the wear of engine parts, and resist the impact of high load and high temperature. In addition, it also has excellent anti-wear and anti-oxidation properties, which can effectively inhibit the formation of sludge and carbon deposits, keep the engine clean, and has a good protective effect on turbocharged engines, and can effectively inhibit the phenomenon of low-speed pre-ignition (LSPI).
Application
Scope of application: suitable for high-performance sports cars, large SUVs and some turbocharged or naturally aspirated high-power engines, which need higher oil film strength and better heat dissipation performance when running, such as BMW M series, Mercedes-Benz AMG series, Porsche 911 and other models. In addition, for some old vehicles, because the internal parts of the engine wear heavily, high viscosity engine oil is needed to ensure the sealing and lubrication effect, and API SP 5W-50 is also a suitable choice.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
