Automobile engine oil
Automobile engine oil API SP GF-6 5W-30 1L*12
"GF-6" is a standard formulated by the International Lubricant Standardization Certification Committee (ILSAC). GF-6A focuses on fuel economy and environmental protection, which adds environmental protection requirements to the API SP standard. "5W-30" is the viscosity grade of engine oil, where "5W" means excellent low-temperature fluidity, which can quickly lubricate the engine in extremely cold weather and reduce cold start wear, and "30" means that it can maintain good fluidity at high temperature and protect the engine from high temperature damage.
0$
Features
Performance characteristics: it is made of deeply refined hydrogenated base oil and imported additives, which has excellent fuel economy and can effectively save fuel. With excellent oil film protection technology, it can provide super anti-wear protection, reduce noise and vibration, and effectively protect the timing chain and reduce wear and elongation. At the same time, it has good cleaning and dispersion performance, and can remove oil sludge, paint film and carbon deposit from piston, cylinder wall and other parts to keep the engine clean.
Application
Scope of application: It is suitable for all kinds of city cars with multi-valves, variable valve timing, turbocharged or naturally aspirated engines and long oil change period, especially for American, Japanese and Korean models, such as Lexus, Toyota, Honda, Ford, Buick, Hyundai and Kia, and can also be used for the maintenance of gasoline hybrid vehicles with gasoline/diesel/natural gas/liquefied gas/ethanol.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
