Automobile engine oil
Automobile engine oil API SN 0W-40 1L*12
API SN 0W-40 is an excellent engine oil. Among them, "API SN" stands for the quality grade of engine oil made according to API gravity, and "Sn" stands for higher quality grade; "0W-40" refers to viscosity grade, "0W" refers to good low-temperature fluidity and good cold start protection performance, and "40" refers to moderate kinematic viscosity at 100℃.
0$
Features
Performance characteristics: excellent low-temperature fluidity, and the low-temperature grade of "0W" enables it to realize rapid cold start in the environment below -35℃, providing good cold start protection for the engine. The viscosity is high at high temperature, the kinematic viscosity at 100℃ is usually about 14cSt, and the high-temperature high-shear viscosity (HTHS) is generally greater than 3.5mPa·s, which can maintain stable oil film strength under high load and high temperature conditions and effectively reduce the wear of engine components. In addition, the engine oil has excellent oxidation resistance and clean dispersibility, which can effectively inhibit the formation of carbon deposit and sludge and keep the engine clean.
Application
Scope of application: It is suitable for various vehicles, especially high-performance engines with turbocharged and high compression ratio, such as Mercedes-Benz, BMW, Audi and other European brands. API SN 0W-40 is also a suitable choice for some old models that are not national six emissions and are not equipped with a gasoline particulate trap (GPF), such as the old Volkswagen Magotan and Passat equipped with EA888 series engines.
Technical Data Sheet
| Quality index and test method |
| Low temperature dynamic viscosity | Boundary pumping viscosity | Kinematic viscosity at 100℃ | High temperature and high shear viscosity | Flash point (opening)℃ | Pour point℃ |
| 6600（-35℃） | 60000（-40℃） | 5.6~<9.3 | 2.6 | 200 | -40 |
|
6600（-35℃） |
60000（-40℃） |
9.3~<12.5 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
12.5~<16.3 |
2.9 | 200 |
-40 |
|
6600（-35℃） |
60000（-40℃） |
16.3~<21.9 |
3.7 | 200 |
-40 |
| 6600（-30℃） |
60000（-35℃） |
5.6~<9.3 | 2.6 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
9.3~<12.5 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
12.5~<16.3 |
2.9 |
200 |
-35 |
|
6600（-30℃） |
60000（-35℃） |
16.3~<21.9 |
3.7 |
200 |
-35 |
| 7000（-25℃） |
60000（-30℃） |
9.3~<12.5 | 2.9 | 205 | -30 |
|
7000（-25℃） |
60000（-30℃） |
12.5~<16.3 | 2.9 |
205 |
-30 |
|
7000（-25℃） |
60000（-30℃） |
16.3~<21.9 | 3.7 |
205 |
-30 |
|
7000（-20℃） |
60000（-25℃） |
9.3~<12.5 |
2.9 | 215 | -23 |
|
7000（-20℃） |
60000（-25℃） |
12.5~<16.3 |
3.7 |
215 |
-23 |
|
7000（-20℃） |
60000（-25℃） |
16.3~<21.9 |
3.7 |
215 |
-23 |
| 9500（-15℃） |
60000（-20℃） |
12.5~<16.3 |
3.7 |
215 |
-18 |
|
9500（-15℃） |
60000（-20℃） |
16.3~<21.9 |
3.7 |
215 |
-18 |
Grease Usage Notice
Pay attention to the safety of storage and use: it should be stored at room temperature and sealed to avoid moisture and mechanical impurities. When using, make sure that the engine and replacement parts are fully cooled to avoid contact with the skin. If it is accidentally contacted, it should be cleaned in time. At the same time, the waste liquid should be properly treated and not dumped in soil and water.
Package
