Diesel engine oil
Diesel engine oil CI-4 10W40 4L*6PCS
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of CI−4＋+diesel engine oil made of refined mineral oil, synthetic oil or the mixed oil of refined mineral oil and synthetic oil as base oil and adding efficient and multifunctional composite additives. The products of this standard are suitable for the lubrication of high-speed, four-stroke diesel engines with EGR that meet the emission standards above Euro III.
0$
Features
1. Anti-wear and Lubrication Protection
It contains highly efficient anti-wear additives that can form a strong and tough oil film on the surfaces of key engine components such as pistons, crankshafts, and bearings, reducing metal-to-metal friction and wear, and extending the engine's service life.
2. High-temperature Oxidation Resistance and Deposit Control
It has strong high-temperature stability and is less likely to oxidize and deteriorate into sludge and carbon deposits, keeping the engine interior clean and preventing oil passage blockage and poor heat dissipation.
3. Anti-corrosion and Sealing Performance
It effectively inhibits the corrosion of metal parts caused by acidic substances produced during fuel combustion, while enhancing the sealing performance of rubber oil seals and reducing oil leakage.
4. Wide Temperature Adaptability
It combines smooth cold start performance with reliable lubrication under high-temperature and high-load conditions, making it suitable for use in scenarios with large seasonal temperature differences or alternating operating conditions.
It contains highly efficient anti-wear additives that can form a strong and tough oil film on the surfaces of key engine components such as pistons, crankshafts, and bearings, reducing metal-to-metal friction and wear, and extending the engine's service life.
2. High-temperature Oxidation Resistance and Deposit Control
It has strong high-temperature stability and is less likely to oxidize and deteriorate into sludge and carbon deposits, keeping the engine interior clean and preventing oil passage blockage and poor heat dissipation.
3. Anti-corrosion and Sealing Performance
It effectively inhibits the corrosion of metal parts caused by acidic substances produced during fuel combustion, while enhancing the sealing performance of rubber oil seals and reducing oil leakage.
4. Wide Temperature Adaptability
It combines smooth cold start performance with reliable lubrication under high-temperature and high-load conditions, making it suitable for use in scenarios with large seasonal temperature differences or alternating operating conditions.
Application
Applicable scenarios and devices
• Applicable engine types: Turbocharged or naturally aspirated diesel engines, suitable for trucks, buses, construction machinery (excavators, loaders), generator sets, agricultural machinery and other equipment.
• Applicable operating conditions: urban road transportation, long-distance freight transportation, high-load operations at construction sites, power generation units in the wild, etc. It is particularly suitable for environments where high-sulfur diesel is used or the operating conditions are more severe.
• Applicable engine types: Turbocharged or naturally aspirated diesel engines, suitable for trucks, buses, construction machinery (excavators, loaders), generator sets, agricultural machinery and other equipment.
• Applicable operating conditions: urban road transportation, long-distance freight transportation, high-load operations at construction sites, power generation units in the wild, etc. It is particularly suitable for environments where high-sulfur diesel is used or the operating conditions are more severe.
Technical Data Sheet
| Technical data sheet of diesel engine oil |
| project | quality index | Experimental method |
| Viscosity grade (according to GB/T 14906) | 10W40 |
|
| Kinematic viscosity (100°C),mm²/s |
12.5~<16 |
GB/T265 |
| Low temperature dynamic viscosity, mPa⋯(°C) Not more than |
7000(-25°C) |
GB/T6538 |
| Low temperature pumping viscosity mPa⋯(°C) Without yield stress Not more than |
60 000(-30℃) |
SH/T0562 |
| Flash point (opening) °C No less than |
205 |
GB/T3536 |
| Pour point，°C Not higher than |
-30 |
GB/T3535 |
Grease Usage Notice
• Replace the oil at regular intervals as recommended by the equipment manufacturer.
• When changing the engine oil, the oil filter element should also be replaced simultaneously to ensure the cleanliness of the lubrication system.
Avoid mixing with engine oils of other viscosity grades or API grades to prevent performance impairment.
• When changing the engine oil, the oil filter element should also be replaced simultaneously to ensure the cleanliness of the lubrication system.
Avoid mixing with engine oils of other viscosity grades or API grades to prevent performance impairment.
Package
